Skip to main content

Euronics

Euronics-logo.png

Task Setup Guide for Euronics

On the tasks groups page, select Euronics from the drop down menu. 

 

Product / Link

You can find a PID on Euronics by locating the URL of your desired product for example. 

https://www.euronics.co.uk/catalogue/refrigeration/fridge-freezers/freestanding-fridge-freezers/beko-ccfm3582w-54cm-fridge-freezer-white-frost-free/p/009CCFM3582W

You can then enter this link into the "Product / Link" section in your task creation.

 

Captcha Services

You need to have either Capmonster or 2Captcha linked in your Carnage settings in order to use this module. 

 

Create a task

To create a task, click the green "Add Task" button in the bottom left. 
Here you'll have the following options:

Profiles

Here you'll want to select the profile that you want to use to checkout with.

Checkout Mode

Here you'll want to select Normal.

Payment Mode

There are three types of payment modes available. These are PayPal, Creditcard and Payment In Advance. 

The Paypal option will send you a webhook that will allow you to checkout the item manually. You will need the extension installed for this.

You must have the Carnage Bot extension installed in order successfully access the Paypal link.

The credit card option will automatically checkout the item for you. You will most likely need to be prepared to accept your banks 3DS when this happens.

The payment in advance option will allow you to ???

Proxy List

Here you want to select the proxies that you would like to use. We recommend that you use a mixture of datacentre and sticky residential proxies to ensure the best likely-hood of success. 

We would not recommend that you run any more than two tasks proxyless.

We recommend a proxy to task ratio of 3:1 this is to help you avoid getting your proxies banned.

 

Delays

Below we recommend to use the following delays:

Initial Item(s) release delays to use - 1,000

Restock delays to use - 15,000

Please checkout these two pages that cover Monitor tasks and Task Timers.

If you are using proxies, you may want to increase/decrease the delays depending on your setup.

 
A correct task should look like:
Euronics.png
Powered by Zendesk